| Reference |
Title |
Date |
| BTC/L1/88 |
Fuel
and Lubricant Effects on the Performance
of Automotive Oxidation and Three-Way
Exhaust-Gas Purification Catalysts |
1988 |
| BTC/L1/82 |
Diesel
Oil Thickening Due to Insolubles |
1982 |
| BTC/L1/81 |
Surface
Deterioration of Cam and Cam Followers
- Investigation of Factors Concerning
the Lubrication of Cams and Followers
in Connection with the CEC Scuffing
Test Procedure |
1981 |
| BTC/L1/79 |
Running-in
Procedures: An Investigation and Analysis
of Procedures in Use in the British
Motor Industry |
1979 |
| |
Engine
Sludge - Recommended Definitions |
1979 |
| BTC/MIRA/L4/79 |
Surface
Deterioration of Cams and Cam Followers
- Scuffing Tests on Two Oils in Connection
with the CEC Procedure |
1979 |
| - |
Surface
Deterioration of Cams and Cam Followers
- Further Experiments with Finger Followers,
and a Comparison with Bucket Followers |
1979 |
| BTC/MIRA/L1/78 |
Surface
Deterioration of Cams and Cam Followers:
An Investigation of a Pitting Test Procedure |
1978 |
| BTC/MIRA/L1/77 |
Surface
Deterioration of Cams and Cam Followers:
The Effect of Lubricant and Oil Temperature
on the Performance of Overhead Cams
and Finger Followers |
1977 |
| BTC/MIRA/L1/76 |
Surface
Deterioration of Cams and Cam Followers:
The Effect of Two Surface Treatments
Applied to Cams - Part II |
1976 |
| BTC/MIRA/L2/76 |
Piston
Ring and Cylinder Bore Scuffing - An
Investigation of Bore Finishing Techniques |
1976 |
| |
The
Effect of Lubricant Additives on the
Durability of Oxidising Catalysts |
1975 |
| - |
Piston
Ring and Cylinder Bore Scuffing - An
Investigation of Ring and Liner Materials
and Surface Treatments Conducted with
a Test Rig |
1975 |
| BTC/MIRA/L2/75 |
An
Investigation of the Factors Influencing
Piston Ring Scuffing Using the MIRA
700 Test Engine |
1975 |
| - |
Surface
Finish of Cylinder Bores and Liners |
1974 |
| BTC/L4/74 |
A
Test Engine for Investigating Piston
Ring and Cylinder Bore Scuffing |
1974 |
| MPI/74/061 |
Factors
Influencing Piston Ring and Cylinder
Bore Scuffing - Experiments with a Test
Rig |
1974 |
| BTC/MIRA/L3/74 |
Surface
Deterioration of Cams and Cam Followers:
The Effect of Oil Temperature and Camshaft
Speed on the Performance of Two Cam
and Follower Material Combinations with
Two Commercial Type Lubricants: Part
1 |
1974 |
| BTC/MIRA/L2/74 |
An
Appraisal of Replica Techniques for
the Examination of the Surfaces of Cylinder
Bores and Liners |
1974 |
| BTC/L2/72 |
Cams
and Tappets: A Survey of Information
(Revised and updated 1990) |
1972 |
| BTC/L1/70 |
Low
Temperature Viscosity of Engine Lubricants,
Using the Cold Cranking Simulator, and
Engine Cranking Studies |
1970 |
